  |
 |
#3002-K
Right Angle Side Grinder Adapter For use with buffing wheels with 1/2" center. Fits 5/8" x 11 thread. $ 10.00 |
|
| Check Out | ||
 |
#3003
Shaft Extensions 3" extension with right hand threads. Select depth of threads. Extension slips on to your electric motor or shaft and tightens with two allen wrench set screws to extend their length. Use buffs with 1/2" hole. $ 6.00 |
|
| Check Out | ||
|
#3004
Shaft Extensions 3" extension with left hand threads. Select depth of threads. Extension slips on to your electric motor or shaft and tightens with two allen wrench set screws to extend their length. Use buffs with 1/2" hole. $ 6.00 |
|
| Check Out | ||
|
#3005
Shaft Extensions 6" extension with right hand threads. Select depth of threads. Extension slips on to your electric motor or shaft and tightens with two allen wrench set screws to extend their length. Use buffs with 1/2" hole. $ 10.00 |
|
| Check Out | ||
|
#3006
Shaft Extensions 6" extension with left hand threads. Select depth of threads. Extension slips on to your electric motor or shaft and tightens with two allen wrench set screws to extend their length. Use buffs with 1/2" hole. $ 10.00 |
|
| Check Out | ||
 |
#3008
Tapered Thread Mandrels Cartridge roll mandrels feature sharp, coarse threads with a good "lead-in" allowing the mandrel to "bite" easily into the abrasive. Rust-proof plated finish. 1/8" pilot diameter. 1/4" shank diameter. $ 3.00 |
|
| Check Out | ||
 |
#3009
Tapered Thread Mandrel with 1/4" shank 1/8" pilot diameter, 1" pilot length, 4 1/2" shank length. $ 4.50 |
|
| Check Out | ||
 |
#3026
Tapered Thread Mandrel with 1/8" shank 1/8" pilot diameter, 1" pilot length, 1" shank length. $ 3.00 |
|
| Check Out | ||
 |
#3029
Hex Mandrel Designed to be used with 1/4" shank buffs using 1/4" arbor hole. $ 3.00 |
|
| Check Out | ||
 |
#3013
Wheel Arbor For 1/2" AH buffs (wheel widths to 7/8") 1/4" shank. The flat-head style permits the wheel to be mounted between a single washer and the flat-head, allowing the wheel to be close to the work surface. $ 3.00 |
|
| Check Out | ||
 |
#3014
Mandrel for Mighty Midget and Yellow Treated Buffs 1/4" shank and 1/8" arbor hole. $ 4.00 |
|
| Check Out | ||
 |
#3020
Mandrel for Midget Buffs 1/8" shank and 1/8" arbor hole. $ 2.00 |
|
| Check Out | ||
 |
#3015
Buffing Wheel Taper Mandrel 1/4" shank fits drills, flexible shafts etc. Designed to hold cloth polishing wheels, felt bobs and other soft center wheels. $ 3.50 |
|
| Check Out | ||
 |
#3016-3019
Tapered Buffing Spindles Designed to be used with pinhole center wheels. Taper length is 2 1/2", overall length is 4 1/4". $ 6.00 |
|
| Check Out | ||